Search results for "Pipeline transport"
showing 10 items of 17 documents
Modelling and Analysis of Flow Rate and Pressure Head in Pipelines
2019
Currently, various approaches with several utilities are proposed to identify damage in the pipeline. The pipeline system is modeled in the form of a distributed parameter system, such that the state space related to the distributed parameter system contains infinite dimension. In this paper, a novel technique is proposed to analyze and model the flow in the pipeline. Important theorems are proposed for testing the observability as well as controllability of the proposed model.
Flow Control of Fluid in Pipelines Using PID Controller
2019
In this paper, a PID controller is utilized in order to control the flow rate of the heavy oil in pipelines by controlling the vibration in a motor pump. A torsional actuator is placed on the motor pump in order to control the vibration on a motor and consequently controlling the flow rates in pipelines. The necessary conditions for the asymptotic stability of the proposed controller are validated by implementing the Lyapunov stability theorem. The theoretical concepts are validated utilizing numerical simulations and analysis, which proves the effectiveness of the PID controller in the control of flow rates in pipelines.
Pipeline Monitoring Architecture Based on Observability and Controllability Analysis
2019
Recently many techniques with different applicability have been developed for damage detection in the pipeline. The pipeline system is designed as a distributed parameter system, where the state space of the distributed parameter system has infinite dimension. This paper is dedicated to the problem of observability as well as controllability analysis in the pipeline systems. Some theorems are presented in order to test the observability and controllability of the system. Computing the rank of the controllability and observability matrix is carried out using Matlab.
A Banki–Michell turbine for in-line water supply systems
2017
The design of a novel Banki-Michell type turbine, to be located in existing water pipelines, is proposed. The turbine has a very efficient diffuser which allows the turbine to be compact and, most important, to have in-line flanges for minimal piping modifications at existing sites. This turbine combines a simple geometry with stable efficiency in a wide range of water discharges. The design procedure estimates the outer diameter of the impeller, its width and the geometry of the diffuser. A series of experimental tests has been carried out to measure the efficiency of the proposed turbine prototype. The turbine was tested in two different configurations, with and without rotational velocit…
A novel visual pipework inspection system
2017
The interior visual inspection of pipelines in the nuclear industry is a safety critical activity conducted during outages to ensure the continued safe and reliable operation of plant. Typically, the video output by a manually deployed probe is viewed by an operator looking to identify and localize surface defects such as corrosion, erosion and pitting. However, it is very challenging to estimate the nature and extent of defects by viewing a large structure through a relatively small field of view. This work describes a new visual inspection system employing photogrammetry using a fisheye camera and a structured light system to map the internal geometry of pipelines by generating a photorea…
Analysis of pipeline accidents in the United States from 1968 to 2009
2014
Pipelines are responsible for the transportation of a significant portion of the U.S. energy supply. Unfortunately, pipeline failures are common and the consequences can be catastrophic. Drawing on data from the Pipeline and Hazardous Materials Safety Administration (PHMSA) that covers approximately 40,000 incidents from 1968 to 2009, this paper explores the trends, causes and consequences of natural gas and hazardous liquid pipeline accidents. The analysis indicates that fatalities and injuries from pipeline accidents are generally decreasing over time, while property damage and, in some cases, the numbers of incidents are increasing over time. In five of the ten cases considered in this p…
Control of Flow Rate in Pipeline Using PID Controller
2019
In this paper a PID controller is utilized in order to control the flow rate of the heavy-oil in pipelines by controlling the vibration in motor-pump. A torsional actuator is placed on the motor-pump in order to control the vibration on motor and consequently controlling the flow rates in pipelines. The necessary conditions for asymptotic stability of the proposed controller is validated by implementing the Lyapunov stability theorem. The theoretical concepts are validated utilizing numerical simulations and analysis, which proves the effectiveness of the PID controller in the control of flow rates in pipelines.
Stochastic Approach for Optimal Positioning of Pumps As Turbines (PATs)
2021
A generic water system consists of a series of works that allow the collection, conveyance, storage and finally the distribution of water in quantities and qualities such as to satisfy the needs of end users. In places characterized by high altitude differences between the intake works and inhabited centres, the potential energy of the water is very high. This energy is attributable to high pressures, which could compromise the functionality of the pipelines
Effect of the Converging Pipe on the Performance of a Lucid Spherical Rotor
2018
Lucid spherical rotor is a cross-flow rotor developed to be installed within a pipeline. The purpose of installing this type of rotor is to collect excess energy available in gravity-fed water pipelines. In order to enhance the efficiency of the rotor which is installed in a channel, this paper aims to study the performance of Lucid spherical rotor with converging pipe. Numerical investigations were carried out to analyze the effect of the converging pipe on the performance of the rotor. Numerical simulations have been carried out using the unsteady Reynolds-averaged Navier–Stokes equations in conjunction with the realizable $$k-{\varepsilon }$$ turbulence model. The validation of the numer…
Research on the internal pressure behavior of metal gas distribution pipelines with different types of tubing defects
2017
The paper aims to approach an important subject related to natural gas distribution networks which, depending on the expansion of the localities, are composed of intercommunicating pipes, pressure reducing stations and branch connections fittings. The urban networks are the most complex ones and the rural areas networks are the simplest. However, irrespective of their installation, they must meet the safety operating requirements as much as possible. According to standards, all these components must be tight and pressure resistant. In this regard, we intend to approach a very important issue related to the behavior of the tubular steel material showing corrosion and/or material defects, and…